DFI-02 6 Digit Display

Calibration Grade High Accuracy Force Indicator
- 6 Digit LED Display (±999,999)
- Resolution to 1 part in 500,000
- ADC - 24 bit @ 50/sec max.
- Bipolar ratiometric input ±6mV/V
- Sensitivity to 0.1µV
The DFI-02 is based on the highly successful DFI-01 and is designed specifically for use in mobile or desktop instrument applications where high accuracy force or weight indication is required. The updated design includes a 24-bit ADC with high stability electronics and the firmware incorporates many new features to make this ideal for ISO-7500/1 calibration systems. The units small physical size and its tilt leg/carry handle offers ease of viewing and portability.
Front panel keys or Remote RS232 offers instant access to Tare, Set Zero, Print, Test (10 display) & Mode (Gross/Net/Peak) with full calibration and set up facilities. The detailed menu driven procedure can be password protected with two access levels to prevent inadvertent changes to calibration or set-up information.
Available Downloads
- 6 Digit LED Display (±999,999)
- Resolution to 1 part in 500,000
- ADC - 24 bit @ 50/sec max.
- Bipolar ratiometric input ±6mV/V
- Sensitivity to 0.1µV
- Peak Capture Facility
- 5 Vdc Transducer Excitation
- 6-wire ratiometric input
- RS-232 control/output port
- Optional Serial Printer port
- Optional Analogue output
- Optional Display Hold*
Input | Bipolar or Unipolar |
---|---|
Resolution Internal Display |
1 part in 16M 1:500,000 |
Non-linearity Intergral Differential |
<0,0015% ±0.5 LSB |
Stability Gain Zero |
1.6ppm/°C <5nV/°C |
Operational range Temperature | -10 to +40°C |
Power Supply | 220/240 Vac @ 50/60Hz Internal links for 110/115 Vac optional 12-28 Vdc |
Sealing | IP54 Front Panel |
Interfaces | RS-232 3 wire Control Optional RS-485/422 |
Dimensions (mm) | 144 x 72 x 220 (Excluding Handle) |
Available Downloads
144mm x 72mm x 220mm (Excluding Handle)
- Panel mount fixings and sealing gland
- Calibration Simulator AS600 for simple calibration or routine checking
- UKAS Calibration
- ISO 376 Calibration
- Analog Output with +/-5V, 0-10V, 0/4-20mA
- Display Hold with plug-in hand-held Freeze switch*
- DFI-02 digital indicator
- AC power cable
- User and Set up manual
Product page last updated: 2015-06-02 16:23:30