SY046 Signal Amp with Tare

Load Cell Amplifier with Digital Tare
- 4-20mA standard output
- Option of 0-5 or 0-10V output
- Drives up to four 350 ohm load cells
- User configurable digital gain
- 24v Supply
The SY046 strain gauge amplifier is an analogue amplifier with the digital gain advantages, it can excite up to 4 x 350Ω bridge transducers and provides either a 4 – 20mA, 0 – 5V or 0 – 10V output with a remotely triggered zero offset. This feature is of great value when load cells are difficult to access or other strain-gauged components have been installed in difficult environments. The display is very useful during set up and calibration.
The SY046 is supplied with a user configurable digital gain (gains of 1, 2, 4 or 8). This can be very useful if a small load is to be monitored with a high dead load offset e.g. connected to a 1 tonne cell with a digital gain of 8 the input could accept the full 0 – 1 tonne range while the output covers a range of 125kg anywhere within the input span.
The zero is reset by means of a positive pulse or by a remote switch to the V+ or GND. A wide range of mV/V sensitivities is accepted (please specify) and there is a +/-20% adjustment at the calibration stage of the set up. A 5way switch selects if you want the display to show the output or a % of the full scale, if it is uni-polar or bipolar, the input sampling rate and what gain setting you require. The unit is supplied in an ABS DIN rail mounted case with a 3digit display.
Available Downloads
- SY046 Data Sheetpdf.
- DIN rail mount
- 3 digit LED display
- User configurable digital gain
- Remote Digital Tare
Parameter |
Min |
Typ |
Max |
Power(dc at22mA+350R bridge) |
9 |
24 |
30 |
Input sensitivity(mV/V) |
0.1 |
|
2 |
Excitationvoltage(V) |
- |
5 |
- |
Bandwidth (-3dB) |
|
200Hz |
|
Power consumption(mW) |
350 |
||
Fullscalestepresponse(usec) Fast Normal |
35 130 |
||
Zerotemperaturedrift at output(uV/C) |
- |
0.5 |
- |
Spantemperature drift (ppm/C) |
- |
50 |
- |
Operatingtemp. (C) |
-40 |
|
85 |
Storagetemperature (C) |
-65 |
|
125 |
Case |
ABScaseORapainted die-cast aluminiumcase.
Dimensions 100x 50x 25mm. |
||
Connections |
Terminal blocks fordc powersupply andloadcellinput |
Available Downloads
- SY046 Data Sheetpdf.
Dimmensions
100mm x 50mm x25mm
- SY046 Signal Amplifier
- User manual
Product page last updated: 2015-07-09 11:30:51